Round Handrail Minder to fit on 1 1/2in OD Tube

Description

Installation Procedure

1. Place the Handrail Minder in the desired location on the top of the handrail.
2. Mark the hole locations for installation.
3. The screws that are supplied with your Handrail Minders are self-drilling and self-tapping screws. All you need to do is line up the screw with the marks you made and drive them in.
4. After the screw is in, back it out a few rotations and apply a drop or two of Loctite on the threads and then drive the screw back into place.
5. Space your next Handrail Minder approximately 3 feet from the first one and repeat the procedure.

Tools:

• Safety glasses or goggles
• Electric drill
• Phillips type driver bit
• Small bottle of Loctite® or other retaining compound

Please note: Grinder Minders should never be placed in the path of pedestrians.