Ultra-Tec Adjust-A-Body with Threaded Eye A-JTE6 Cable Railing Fitting for Metal or Wood Posts

$26.02

Ultra-Tec Adjust-A-Body with Threaded Eye A-JTE6

  • Works With Cable Sizes: 1/8″, 3/16″
  • Tensioning Fitting
  • Swaged Fitting
  • For use with metal posts, use with Threaded Tabs (not included).
  • For use with wood posts, use with Lag Eyes (not included).

Ferrule Not Included

Screw Not Inccluded

Stainless Steel Cable Not Included

In stock (can be backordered)

Print This Page SKU: 20CFAJTE6 Categories: ,

Description

The Adjust-A-Body® with Threaded Bolt is an exposed, swaged, tensioning, face-of-the-post-mounted fitting that is recommended for level runs only. This fitting is available for 1/8”,3/16”, 1/4”, 5/16”, and 3/8” diameter 1×19 stainless steel cable.

The Adjust-A-Body® with Threaded Bolt can be used with any fitting on the opposite end of the run. The short thread of the threaded bolt portion of the fitting is secured into a pre-drilled and tapped hole in the end post. The cable is retained within the body portion of the fitting by a ferrule swaged onto the end of the cable. The lock nut is installed all the way onto the threaded bolt first, followed by the body, which is secured onto the threaded bolt, creating tension on the cable. Once sufficient tension is achieved, the lock nut is secured against the end of the body to secure the fitting from loosening.

Use of this fitting requires an appropriately sized ferrule that is swaged onto the cable, which must be purchased separately.

The Adjust-A-Body® with Threaded Eye is a swaged, tensioning, face-of-the-post-mounted fitting that can be used on level or pitched runs. This fitting is available for 1/8”, 3/16”, and 1/4” diameter 1×19 stainless steel cable.

The Adjust-A-Body® with Threaded Eye can be used with any fitting on the opposite end of the run. This fitting attaches to the wood end post by installing a Lag Eye into a pre-drilled hole in the end post and attaching the threaded eye portion of the fitting to the lag eye with a button head screw. The cable is retained within the body portion of the fitting by a ferrule swaged onto the end of the cable. The lock nut is installed all the way onto the threaded eye first, followed by the body, which is secured onto the eye, creating tension on the cable. Once sufficient tension is achieved, the lock nut is secured against the end of the body to prevent the fitting from loosening.

While this fitting can be used on pitched or level runs, it is most appropriate for pitched runs because the threaded eye portion of the fitting pivots at the lag eye. The pre-drilled hole for the lag eye is drilled level, making installation easy.

Use of this fitting requires an appropriately sized ferrule that is swaged onto the cable, which must also be purchased separately.

Additional information

Weight 0.165 lbs
Dimensions 1 × 1 × 1 in
For Cable Size(s)

1/8" Cable, 3/16" Cable

Tensioning or Not

Tensioning

Swaged or Not Swaged

Swaged

Brand

Product CAD file

Drawing file for this part is not currently available.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.