Ultra-Tec Clip-On Fixed Jaw and Threaded Tab F-JC2-4 Cable Railing Fitting for Metal or Wood Posts

$27.62

Ultra-Tec Clip-On Fixed Jaw and Threaded Tab F-JC2-4

  • Works With Cable Size: 1/8″
  • Non-Tensioning Fitting
  • Swaged Fitting
  • For use with metal posts, use with Threaded Tabs (not included).
  • For use with wood posts, use with Lag Eyes (not included).

Screw Not Included

Ferrule Not Included

Stainless Steel Cable Not Included

Available on backorder

Print This Page SKU: 20CFFJC24 Categories: ,

Description

The Clip-On Fixed Jaw is externally a duplicate of the Fixed Jaw and is only available for 1/8” and 3/16” diameter 1×19 stainless steel cable.

The Clip-On Fixed Jaw was created for applications that called for factory swaged fittings on both ends of the cables, without requiring over-sized holes through the intermediate posts (so an entire Fixed Jaw could pass through). This fitting accomplishes that with a maximum diameter of a .250” diameter ferrule that is pre-swaged to the cable. Once the cable with only a ferrule swaged to it is run through the intermediate posts to the end post to which it will attach, the jaw is slipped onto the cable over the ferrule and the clip installed at the ferrule. The jaw then slides back against the clip, which prevents the fitting from coming off the cable.

This fitting attaches to the metal end post by installing a Threaded Tab into a pre-drilled and tapped hole in the end post and attaching the Clip-On Fixed Jaw to the threaded tab with a button head screw.

Use of this fitting requires an appropriately sized ferrule that is swaged onto the cable, which must also be purchased separately.

The Clip-On Fixed Jaw is externally a duplicate of the Fixed Jaw and is only available for 1/8” and 3/16” diameter 1×19 stainless steel cable.

The Clip-On Fixed Jaw was created for applications that called for factory swaged fittings on both ends of the cable, without requiring over-sized holes through the intermediate posts (so an entire Fixed Jaw could pass through). This fitting accomplishes that with a .250” diameter ferrule that is pre-swaged to the cable. Once the cable with just a ferrule swaged to it is run through the intermediate posts to the end post to which it will attach, the jaw is slipped onto the cable over the ferrule and the clip installed at the ferrule. The jaw then slides back against the clip, which prevents the fitting from coming off the cable.

This fitting attaches to the wood end post by installing a Lag Eye into a pre-drilled hole in the end post and attaching the Clip-On Fixed Jaw to the lag eye with a button head screw. Lag eye and screw sold separately.

Use of this fitting requires an appropriately sized ferrule that is swaged onto the cable, which must also be purchased separately.

Additional information

Weight .05 lbs
Dimensions 1 × 1 × 1 in
For Cable Size(s)

1/8" Cable

Tensioning or Not

Non-Tensioning

Swaged or Not Swaged

Swaged

Brand

Product CAD file

Drawing file for this part is not currently available.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.