Ultra-Tec Push-Lock Turnbuckle Threaded Eye PL-TB-TE-4 Cable Railing Fitting for Metal or Wood Posts

$50.29

Ultra-Tec Push-Lock Turnbuckle Threaded Eye PL-TB-TE-4

  • Works With Cable Size: 1/8″
  • Swageless Fitting
  • Tensioning Fitting
  • For use with metal posts, use with Threaded Tabs (not included).
  • For use with wood posts, use with Lag Eyes (not included).

Screw Not Included

Stainless Steel Cable Not Included

Available on backorder

Print This Page SKU: 20CFPLTBTE4 Categories: ,

Description

The Push-Lock® Turnbuckle Threaded Eye is an exposed, swageless, tensioning, face-of-the-post-mounted fitting that is suitable for level or pitched runs, and is available for 1/8” and 3/16” diameter 1×19 stainless steel cable.

The Push-Lock® Turnbuckle Threaded Eye can be used with any fitting on the opposite end of the run. This fitting consists of four separate pieces: the threaded eye, the body, the lock nut, and the Push-Lock® Stud. This fitting attaches to the metal end post by installing a Threaded Tab into a pre-drilled and tapped hole in the end post and attaching the threaded eye portion of the fitting to the tab with a button head screw (screw and threaded tab are sold separately). The lock nut is installed all the way onto the threaded eye first, followed by the body. The Push-Lock® Stud threads into the body, and the cable attaches to the stud fitting via our Push-Lock® locking wedge system which requires no special tools. Tension is created by using the body as a turnbuckle. Once sufficient tension is achieved, the lock nut is secured against the body to prevent the fitting from loosening.

While this fitting can be used on pitched or level runs, it is most appropriate for pitched runs because the threaded eye portion of the fitting pivots at the threaded tab.

The Push-Lock® Turnbuckle Threaded Eye is an exposed, swageless, tensioning, face-of-the-post-mounted fitting that is suitable for level or pitched runs, and is available for 1/8” and 3/16” diameter 1×19 stainless steel cable.

The Push-Lock® Turnbuckle Threaded Eye can be used with any fitting on the opposite end of the run. This fitting consists of four separate pieces: the threaded eye, the body, the lock nut, and the Push-Lock® Stud. This fitting attaches to the wood end post by installing a Lag Eye into a pre-drilled hole in the end post and attaching the threaded eye portion of the fitting to the lag eye with a button head screw. The lock nut is installed all the way onto the exposed machine thread of the threaded eye first, followed by the body. The Push-Lock® Stud threads into the body, and the cable attaches to the stud fitting via our Push-Lock® locking wedge system which requires no special tools. Tension is created by using the body as a turnbuckle. Once sufficient tension is achieved, the lock nut is secured against the body to prevent the fitting from loosening.

While this fitting can be used on pitched or level runs, it is most appropriate for pitched runs because the threaded eye portion of the fitting pivots at the lag eye. The post hole for the lag eye is drilled level, making installation easy.

The most likely application for this fitting would be when substantial take-up is required on a pitched application, AND there is a preference for a swageless fitting, AND there is less than 2-1/2” of space available in back of the end post.

For sleeved posts with an outside diameter of greater than 4-1/2” you can use the Push-Lock® Turnbuckle Threaded Eye with the extended length lag. The extended length lag is 3” long, designed to reach past sleeves and drywall to find the wood post or frame underneath. Lag eye and screw sold separately.

Additional information

Weight .2 lbs
Dimensions 1 × 1 × 1 in
For Cable Size(s)

1/8" Cable

Tensioning or Not

Tensioning

Swaged or Not Swaged

Swageless

Brand

Product CAD file

Drawing file for this part is not currently available.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.