CRL Z-Series Round Type 2″ Radius Base Stainless Steel Clamp for 3/8″ Glass

Description

• For 3/8″ (10 mm) Glass
• Use Monolithic Tempered Glass
• Use on Mezzanines, Partitions, Railings and Windbreaks
• Steel Pin Available for Additional Glass Support

This CRL Z-Series Round Type Radius Base Glass Clamps are designed to be used on glass thickness of 1/4″ up to 1/2″ (6 to 12 mm)

NOTE: 1/2″ (12 mm) notch is required if using the steel pin (included with the clamp) for additional glass support.

SPECIFICATIONS:
Glass Thicknesses: Models for 1/4″ to 1/2″ (6 to 12 mm)
Base Design: Radius
For Use With: 1-1/2″ or 2″ (38 or 50.8 mm) Diameter Round Tubing
Material: Choice of Zinc Constructed or Stainless Steel. Stainless Steel or Powder Painted Zinc Clamps are recommended for more durability in exterior applications.
Glass Fabrication:
For 1/4″ (6 mm), 5/16″ (8 mm), and 3/8″ (10 mm)
Thick Glass: 1/2″ (12 mm) notch is required if using provided steel pin for glass support. For 1/2″ (12 mm) Thick Glass: 9/16″ (14 mm) diameter hole required if using provided steel pin for glass support.
Includes: Rubber Gaskets and Steel Pin (for optional use) with Grommet
Replacement Hardware: CRL P612 for Replacement Screws

*Pictures from: C.R. Laurence Co., Inc.